
Accessories, Tools
We try to keep all information current, but regret that prices
and availability are subject to change. Special Order Items (SO) are priced as of the last time we sold one.
Last updated 02/12/21.
Engine Stand | 0 | NA | ||
Auto Advance Lock Washer | 0 | NA | ||
Clutch Spring Compression Tool | 2 | - | ||
Clutch Locking Tool | 0 | NA | ||
Rocker Spindle Puller | 2 | - | ||
Tool, Oil Seal Guide, 1/4 x 26 | 4 | - | ||
Valve Guide Extractor & Inserter | 1 | - | ||
Valve Seat Face Cutter | 0 | NA | ||
Main Bearing Race Extractor | 0 | NA | ||
Front Isolastic Assembly Tool | 2 | - | ||
Drift and Handle Set | 1 | - | ||
Sprocket/Clutch Center Puller | 2 | - | ||
Slide Hammer | 2 | - | ||
Strap Wrench | 1 | - | ||
MK3 Isolastic Adjuster Spanner | 2 | - | ||
Rocker Spindle Alignment Tool | 2 | - | ||
Primary Chaincase Inspection Cap Tool | 0 | NA | ||
Intermediate Shaft Support Plate Tool | 1 | - | ||
Timing Pinion Extractor | 1 | - | ||
Timing Pinion Extractor, Rental, $60 Deposit | 1 | - | ||
Box Spanner, 7/8 x 3/4 Whitworth (1.5" x 1 5/16") | 0 | NA | ||
Box Spanner, Sump Plug, 1972-1975 (1.5" x 1 5/16") | 1 | - | ||
Wrench, Sump Plug, 1972-1975 | 2 | - | ||
Valve Spring Compressor, Motion Pro | 0 | NA | ||
Peg Spanner, Caliper & Wheel | 0 | NA | ||
Tool Roll (With Tools) | 1 | - | ||
Tappet Gauge, .006" and .008", (R) | 0 | NA | ||
Exhaust Spanner | 4 | - | ||
Valve Guide Ball Hone, .3125" | 6 | - | ||
Timing Disc (Degree Wheel), Alloy | 3 | - | ||
Wrench Set, Comb., Whitworth, 7 Piece, 1/8 to 1/2 | 0 | NA | ||
Tool Roll, NORTON Logo | 1 | - | ||
Tool Bag, NORTON Logo | 0 | NA | ||
Whitworth Deep Socket Set 6Pt, 8 Piece, Japan | 0 | NA | ||
Whitworth Socket Set 6Pt, 7 Piece 1/8-9/16, Japan | 3 | - | ||
Whitworth Socket Set 12Pt, 8 Piece 1/8-9/16, Japan | 1 | - | ||
Whitworth Socket Set 12Pt, 6 Piece 1/8-7/16, Japan | 5 | - | ||
Hagon Shock Spring Adjuster, (R) | 0 | NA | ||
Wrench Set, Open End, Whitworth, 6 piece, 1/8-1/2 | 0 | NA | ||
Wrench Set, Box, 5 Piece, Whitworth, 1/8 to 1/2 | 0 | NA | ||
Screwdriver, Reversable, (R) | 0 | NA | ||
Threadguage, Whitworth, Metric | 3 | - | ||
Box Spanner 7/8" x 15/16" Tubular, Spark Plug, (R) | 4 | - | ||
Magnetic Pickup | 2 | - | ||
Box Spanner 5/8" x 3/4", Tubular, Spark Plug | 5 | - | ||
Tire Gauge, AccuGage With Flex Hose, 60PSI | 1 | - | ||
Oil Filter Strap Wrench, Motion Pro | 1 | - | ||
Safety Wire Pliers, 9" | 0 | NA | ||
Stainless Safety Wire, .032", 1 Lb., App. 600ft | 3 | - | ||
Bit, Twist Drill, 1/16", Steel, Quad-Cut | 32 | - | ||
Battery Reservoir, Acid Trap | 2 | - | ||
Carburetor Synchronizer, Motion Pro | 0 | NA | ||
Caliper Plug Removal Tool | 4 | - | ||
Ignition Timing Tool, (850 MK3) | 0 | NA | ||
Gearbox Lockring Socket, Andover Norton | 3 | - | ||
MK3 Crank Case Puller, Old Britts | 0 | NA | ||
Crank Case Puller, Pre-MK3, Old Britts | 0 | NA |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information
This page was written and designed by F. H. Eaton & Associates.