
Factory and Special Tools
We try to keep all information current, but regret that prices
and availability are subject to change. Special Order Items (SO) are priced as of the last time we sold one.
Last updated 02/12/21.
Please Note: the "19-" preceding all order numbers is an Old Britts grouping code. The second portion of the order number is normally the factory part number (e.g., 19-060627 is the Norton part 06-0627). When ordering, you can use our order number or the factory part number.
Engine Stand | 0 | NA | ||
14-100901 | Spoke Wrench for .25 & .21 Nipples, Buchanan | 0 | NA | |
19-060949 | Auto Advance Lock Washer | 0 | NA | |
19-060999 | Clutch Spring Compression Tool | 2 | - | |
19-061015 | Clutch Locking Tool | 0 | NA | |
19-061028 | Rocker Spindle Puller | 2 | - | |
19-061359 | Tool, Oil Seal Guide, 1/4 x 26 | 4 | - | |
19-063964 | Valve Guide Extractor & Inserter | 1 | - | |
19-063969 | Valve Seat Face Cutter | 0 | NA | |
19-063970 | Main Bearing Race Extractor | 0 | NA | |
19-063971 | Front Isolastic Assembly Tool | 2 | - | |
19-064292 | Drift and Handle Set | 1 | - | |
19-064297 | Sprocket/Clutch Center Puller | 2 | - | |
19-064298 | Slide Hammer | 2 | - | |
19-064622 | Strap Wrench | 1 | - | |
19-066532 | MK3 Isolastic Adjuster Spanner | 2 | - | |
19-067185 | Rocker Spindle Alignment Tool | 2 | - | |
19-067245 | Primary Chaincase Inspection Cap Tool | 0 | NA | |
19-067325 | Intermediate Shaft Support Plate Tool | 1 | - | |
19-067524 | Timing Pinion Extractor | 1 | - | |
19-067524/R | Timing Pinion Extractor, Rental, $60 Deposit | 1 | - | |
19-067624 | Box Spanner, 7/8 x 3/4 Whitworth (1.5" x 1 5/16") | 0 | NA | |
19-067624C | Box Spanner, Sump Plug, 1972-1975 (1.5" x 1 5/16") | 1 | - | |
19-131733 | Wrench, Sump Plug, 1972-1975 | 2 | - | |
19-131742 | Grease Gun, Push Type, 90cc Capacity | 2 | - | |
19-500001 | Valve Spring Compressor, Motion Pro | 0 | NA | |
70-063965 | Peg Spanner, Caliper & Wheel | 0 | NA | |
70-600001 | Tool Roll (With Tools) | 1 | - | |
70-600003 | Exhaust Spanner | 4 | - | |
70-600100 | Battery Reservoir, Acid Trap | 2 | - | |
70-600104 | Caliper Plug Removal Tool | 4 | - | |
70-NM23441 | Gearbox Lockring Socket, Andover Norton | 3 | - | |
OB-70601 | MK3 Crank Case Puller, Old Britts | 0 | NA | |
OB-70602 | Crank Case Puller, Pre-MK3, Old Britts | 0 | NA |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information
This page was written and designed by F. H. Eaton & Associates.