Engine, Chaincase, Electric Start
We try to keep all information current, but regret that prices
and availability are subject to change. Special Order Items (SO) are priced as of the last time we sold one.
Last updated 02/12/21.
Please Note: the "11-" preceding all order numbers is an Old Britts grouping code. The second portion of the order number is normally the factory part number (e.g., 11-060627 is the Norton part 06-0627). When ordering, you can use our order number or the factory part number.
Washer, Felt, Inner Primary | 8 | - | ||
Dowel, Primary Cover | 6 | - | ||
Alternator,Rotor/Stator, Single Phase, 130w, Emgo | 0 | NA | ||
Alternator Single Phase, 130w, Emgo & Podtronics | 1 | - | ||
Sealing Washer (Fiber), Drain Screw | 7 | - | ||
Felt Washer | 6 | - | ||
Chain, Triplex, Commando, 92 Link | 1 | - | ||
Nut, Primary Cover, Chrome | 3 | - | ||
Nut, Primary Cover, Stainless | 4 | - | ||
Primary Inner Cover, Pre MK3 | 0 | NA | ||
Chaincase Centre, Stud, 3/8 x 24 | 3 | - | ||
Chaincase Centre, stud, 3/8 x 24, USED | 3 | - | ||
Spacer, Stator Stud | 16 | - | ||
Sprocket, Engine, Triplex, 26T | 1 | - | ||
Sprocket, Engine, Triplex, 26T, USED | 3 | - | ||
Stud, Stator, 5/16 x 18 x 24 | 11 | - | ||
Stud, Stator, 5/16, USED | 2 | - | ||
Nut, Rotor, 5/8 x 20, Commando | 1 | - | ||
Cap, Inspection, Primary Cover, Large | 7 | - | ||
Washer, Tab | 27 | - | ||
Hex Nut, 3/8 x 24, Lock, Plated | 55 | - | ||
Nut, 3/8 x 24, Lock, USED | 0 | NA | ||
O-Ring, Large, Commando primary cover | 5 | - | ||
3/8" Washer Shim, .027" Thick | 4 | - | ||
Spacer, Alternator Rotor | 4 | - | ||
Cap, Inspection, Rotor | 6 | - | ||
Screw, Hammerdrive | 16 | - | ||
Washer, Rotor Shim, .036 | 7 | - | ||
Washer, Rotor Shim, .010 | 12 | - | ||
Gasket, Inner pri, Pre 75 | 6 | - | ||
Plate, Timing Mark | 3 | - | ||
Plate, Inner Primary Cover | 7 | - | ||
Screw, Selftapping | 18 | - | ||
Grommet, Alternator | 5 | - | ||
O-Ring, Timing Inspection Cover | 6 | - | ||
O-Ring, Clutch Adjuster Cover | 12 | - | ||
Level Plug, Neutral Switch Plug, 3/8 x 24 | 4 | - | ||
O-Ring, Level Plug, 5/16ID, 7/16OD, 1/16T | 19 | - | ||
Primary Cover, Pre 75 Commando, with Timing Plate | 0 | NA | ||
Sprocket, Engine, MK3, 26T | 1 | - | ||
Stud, 5/16 x 24 | 11 | - | ||
Gasket, Inner Primary, Mk3 | 12 | - | ||
Primary Cover, Outer, MK3 | 1 | - | ||
Timing Indicator Plate, Mk3 | 2 | - | ||
O-Ring, MK3 Starter to Case | 6 | - | ||
Outrigger Plate | 1 | - | ||
Outrigger Plate & Studs (06-4716), USED | 0 | NA | ||
Stud, Stator Fixing, 5/16 x 18 x 24 | 9 | - | ||
Stud, Tensioner Body Fixing | 4 | - | ||
Body, Hydraulic Tensioner | 2 | - | ||
Plug, Sealing | 3 | - | ||
Washer, Tab, MK3 Inner Primary | 8 | - | ||
Starter Drive Gear With Needle Bearing, 67T | 1 | - | ||
Starter Clutch, Sprag Type, 18 Tooth | 1 | - | ||
Washer, Starter Drive, "Belleville" .50" | 0 | NA | ||
MK3 Starter Gear Ball, 6mm | 7 | - | ||
MK3 Starter Motor, SEE ALT link for rebuilt motors | 0 | NA | ||
MK3 Starter Motor, 4 Brush, 4 Winding, Rebuilt | 0 | NA | ||
Convert MK3 Starter, 4 Brush/4 Winding & Armature | 0 | NA | ||
Convert MK3 Starter, 4 Brush/4 Winding | 0 | NA | ||
Oilseal, Mk3 Gearshift, LH | 6 | - | ||
Bush, Gearshift, Mk3 Primary Cover | 4 | - | ||
Slipper Assy, Mk3 Primary Chain | 2 | - | ||
Slipper Spring, Mk3 Primary Chain | 6 | - | ||
Slipper Nylon Plug, Mk3 Primary Chain | 4 | - | ||
Screw, 1/4 x 20, Chaincase, MK3, Philips | 30 | - | ||
Key, Rotor | 3 | - | ||
Inner Race, Electric Start | 0 | NA | ||
"BELLEVILLE" WASHER .07" | 0 | NA | ||
Oilseal, Inner Primary, Mk3 | 4 | - | ||
Primary Chain Tensioner Plate, MK3 | 1 | - | ||
Cover, Inner Primary, MK3 | 2 | - | ||
Bush, Shift, Mk3 Outer Primary | 4 | - | ||
Chaincase Steady, Mk3 | 2 | - | ||
Starter Motor Bolts (Set OF 2) | 0 | NA | ||
Gasket, Tensioner Body, MK3 | 3 | - | ||
Split Collet, Valve, Pair | 16 | - | ||
Split Collet Set, Valve, 4 Pair, PM | 5 | - | ||
Sprocket, Engine, 21T, Pre-Commando | 0 | NA | ||
Sprocket, Engine, 23T, Pre-Commando | 0 | NA | ||
Key, Engine Sprocket | 5 | - | ||
Atlas Primary Chaincase Center Nut, 1 x 20 | 2 | - | ||
Atlas Primary Chaincase Center Nut 1x20, Stainless | 1 | - | ||
Nut, Rotor, 5/8 x 20, Atlas | 0 | NA | ||
3/4" Internal Toothed Lock Washer, Plated | 13 | - | ||
Dowel | 4 | - | ||
Hex Head Bolt, 1/4 x 28, 1/2", Plated | 31 | - | ||
Rotor, 54202299, Alternator, All Commandos, Emgo | 1 | - | ||
Single Phase Stator, 47239, 200w, Emgo | 1 | - | ||
Single Phase Stator, Alternator, 47205, 130w, Emgo | 0 | NA | ||
Three Phase Stator, Alternator, Lucas 47244, 180w | 0 | NA | ||
Three Phase Stator, Alternator, 180w, Emgo | 1 | - | ||
PowerGrip HTD Primary Drive Belt, 30mm 960 | 0 | NA | ||
Belt Drive, 32T Drive Pulley Complete, 30mm | 3 | - | ||
Primary Drive Belt, 8M 30mm 880 | 10 | - | ||
Primary Drive Belt, 8M 30mm 896, Speedco | 5 | - | ||
Primary Drive Belt, 8M 30mm 912 | 5 | - | ||
Belt Drive Clutch Basket | 0 | NA | ||
Oilseal, Starter Motor | 0 | NA | ||
Alternator,Rotor/Stator, Single Phase, 180w, Emgo | 1 | - | ||
Alternator Single Phase, 200w, Emgo and Podtronics | 1 | - | ||
Alternator,Rotor/Stator, Three Phase, 180w, Lucas | 0 | NA | ||
Alternator, Three Phase, 180w, Emgo & Podtronics | 2 | - | ||
Sprocket, Engine, 22T, Pre-Commando | 0 | NA | ||
Gear, Idler, Starter Drive, 28T | 1 | - | ||
Spindle, Idler, Starter Drive | 1 | - | ||
Gear, Idler | 0 | NA | ||
Shaft, MK3 Backfire Device | 0 | NA | ||
Gear, Starter Drive, 33T | 1 | - | ||
Bearing, Needle | 1 | - | ||
Thrust Plate | 1 | - | ||
Carrier, Starter Drive | 1 | - | ||
Nut, Shouldered, Starter Shaft | 0 | NA | ||
Circlip | 2 | - | ||
Thrust Washer | 0 | NA | ||
Flat Thrust Washer, Outer | 0 | NA | ||
Thrust Washer, Inner, Shouldered | 0 | NA | ||
Bracket Solenoid | 3 | - | ||
Circlip, Backfire Shaft | 5 | - |
STATUS Codes: OO - On Order, SO - Special Order, OP - Out of Print, D - Dropped, BO - Back Ordered, NA - Not Available, U-Used. More Status Information
This page was written and designed by F. H. Eaton & Associates.