This set of pictures shows a disc carrier, a retaining dish and one carrier in the dish. The way this Norvil setup works is the center part of the dish is sandwiched between the hub and the carrier and the outside part of the dish presses up against the Norvil rotor (14_000002). The carrier fits inside the rotor and presses up against the four retaining washers on the carrier. Even though this setup has the appearance of a floating disc, it is not floating and does qualify for vintage racing.

There are three types of carriers available and three types of dishes (one for each carrier type):
For the Norvil front hub (14_000001), 14-000003 (six hole carrier), 14-000010 (dish)
For the Norton front hub, (06-2867), 14-100001 (five hole carrier), 14-100002 (dish)
For the Norton MK3 rear hub, (06-6127), 14-100004 (five hole carrier), 14-100003 (dish)

This set of pictures show the Norvil disc mounted on the front wheel of a Commando. This is a two disc setup with matching Norvil sliders (13_200001) and AP Lockheed Calipers (14_000004).

This page was written and designed by F. H. Eaton & Associates if you have any questions or comments please contact us at eaton@oldbritts.com